Template:Pick and Roll Drill: Difference between revisions
From Lacrosse Plan Drills
(Created page with "'''Pick and Roll Drill''' * Set up 4 cones around the 12 and 8 meters, two cones up top and two on goal line extended out about 10 yards. * The balls are down low at the lowe...") |
No edit summary |
||
| Line 5: | Line 5: | ||
* X2 then rolls off towards the goal and looks for the feed from X1. X1 must be sure to keep moving to create space to feed X2 in the middle. | * X2 then rolls off towards the goal and looks for the feed from X1. X1 must be sure to keep moving to create space to feed X2 in the middle. | ||
* Both lines are going at the same time, and all feeds end with a shot into the goal. | * Both lines are going at the same time, and all feeds end with a shot into the goal. | ||
<noinclude>[[Category:Shooting Drills]]</noinclude> | |||
Revision as of 08:39, 21 June 2016
Pick and Roll Drill
- Set up 4 cones around the 12 and 8 meters, two cones up top and two on goal line extended out about 10 yards.
- The balls are down low at the lower cones with X1. X1 looks to drive up the lane and accept a pick from X2.
- X2 must time the pick and stay still till X1 passes and releases off the pick.
- X2 then rolls off towards the goal and looks for the feed from X1. X1 must be sure to keep moving to create space to feed X2 in the middle.
- Both lines are going at the same time, and all feeds end with a shot into the goal.
